Search results for "Cerium oxide"
showing 10 items of 40 documents
Visible light photocatalytic activity of macro-mesoporous TiO2-CeO2inverse opals
2018
Macro-mesoporous TiO2 inverse opal materials were synthesized and they were tested as photocatalysts under visible light irradiation. The influence of cerium oxide addition towards the Rhodamine B (RhB) photodegradation activity was evaluated. Structural, textural, spectral and surface properties of the TiO2-CeO2 inverse opal nanocomposites were studied by XRD, XPS, SEM, TEM, N2 adsorption-desorption, Diffuse Reflectance UV–vis and Photoluminescence spectroscopies. Compared to commercial TiO2 anatase, the macro-mesoporous TiO2 inverse opal exhibited six times higher kinetic rate constant in the RhB degradation under visible light irradiation. The good photocatalytic activity was related to …
Metal-support and preparation influence on the structural and electronic properties of gold catalysts
2006
Abstract Nanostructured gold catalysts supported on CeO2 and SiO2 were prepared by the deposition–precipitation (DP) and the solvated metal atom dispersion (SMAD) techniques. The structural and electronic properties of the catalysts were investigated by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS). Gold was found as small metal nanoparticles (cluster size ∼2 nm) in the SMAD-prepared samples and in ionic state in the DP catalysts. The catalytic activity of the samples was tested in the reaction of low temperature CO oxidation. Gold nanosized particles in a pure metallic state exhibited a worse catalytic performance, both on ceria and…
A Solar Photothermocatalytic approach for the CO2 conversion: Investigation of different synergisms on CoO-CuO/Brookite TiO2-CeO2 catalysts
2022
Abstract The photoactive features of the least common polymorph of TiO2, i.e. brookite, were combined with the thermocatalytic redox ones of cerium oxide, focusing on the effects of the addition of small amounts of Co-Cu oxides for the solar CO2 conversion. By considering the characterization data, a surface segregation of the hosted metal oxides on the TiO2-CeO2 composite was evidenced, and their presence increased the amount of oxygen vacancies and improved the charge carriers separation. The bimetallic oxides-based sample was the most performing one in the photocatalytic carbon dioxide reduction at room temperature. The formation of carbon monoxide and methane was 5 and 0.5 μmol g−1h−1, …
Influence of barium and cerium oxides on alumina supported Pd catalysts for hydrocarbon combustion
2002
Abstract The effects of baria and ceria additions to alumina-supported palladium catalysts have been investigated. Two series of binary Al 2 O 3 –BaO and ternary oxides Al 2 O 3 –CeO 2 –BaO were prepared using a sol–gel method and then characterized, after high-temperature treatments, by XRD, BET, TG, TEM and EDXS analyses. The influence of baria and ceria on the thermal stability and morphology of the supports was examined. A baria content of 12 wt.% appears the most effective for alumina stabilization. Palladium catalysts were prepared by impregnation method using Pd(NH 3 ) 4 (NO 3 ) 2 and were characterized by XRD and TEM. The catalysts showed high activity in the total oxidation of meth…
Mesoporous SBA-15 silica modified with cerium oxide: Effect of ceria loading on support modification
2010
Abstract The present work investigates the effect of ceria loading on silica SBA-15. Five CeO2/SBA-15 samples with CeO2 content equal to 5, 10, 15, 20 and 30 wt% were prepared by wetness-impregnation of the support with cerium nitrate hexahydrate, as precursor, dissolved in ethanol. After drying at room temperature, the resulting samples were calcined at 400 °C for 2h. Characterizations by BET surface area and pore-size distribution, XRD, NH3-TPD and H2-TPR were performed.
Structural and Chemical Characterization of Cerium Oxide Thin Layers Grown on Silicon Substrate
2015
In this study, we report transmission electron microscopy and electron energy loss spectroscopy study of cerium oxide thin layers deposited on silicon substrate. Transmission electron microscopy experiments have revealed the flat morphology of the deposited layers. In addition, studies of high resolution images have indicated the presence of mainly ceria crystallized nanoparticles. Energy electron loss spectroscopy measurements were also performed in scanning mode to study the evolution of the cerium valence. In addition to Ce4+ inside the layer, the presence of amorphous cerium silicate with valence +3 is pointed out at the vicinity of the substrate.
Effect of Impurities (Carbon and Manganese) on Iron Oxidation at High Temperature: Impurities-Rare Earth Element (Cerium) Interactions
1997
Apres oxydation du fer pur revetu d'un depot de CeO 2 , (T = 7000C, pO 2 = 0,04 Pa), le cerium se trouve localise dans la couche de wustite sous la forme de CeFeO 3 . La dissolution de cette phase assure l'introduction homogene du cerium a l'interieur de la couche de FeO. Sa formation est attribuee a un processus d'oxydo-reduction entre le depot de CeO 2 et les premiers germes de FeO. Dans le cas des echantillons d'acier Fe-Mn-C, recouverts de CeO 2 , le cerium n'est pas incorpore dans la couche d'oxyde de fer de facon homogene et se retrouve sous la forme de CeO 2 a l'interface oxyde-gaz. Le role de chaque impurete est maintenant bien etabli: le manganese inhibe l'incorporation du cerium d…
XPS study of supported gold catalysts:the role of Au0 and Au+? species as active sites.
2006
Gold nanoparticles supported on different oxides (SiO2, CeO2 and TiO2) were prepared by the SMAD (solvated metal atom dispersion) and deposition–precipitation (DP) techniques. The physical and chemical characterization of the catalysts was performed by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the catalytic activity was tested during the reaction of low temperature CO oxidation. The structural and surface analyses evidenced the presence of small gold crystallites (cluster size ∼2–5 nm) in all the SMAD-prepared samples and oxidized gold species in the case of the DP catalysts. A different surface distribution of ionic gold species was found on the different suppo…
Relationship between structure and CO oxidation activity of ceria supported gold catalysts
2005
Gold catalysts supported on cerium oxide were prepared by solvated metal atom dispersion (SMAD), by deposition-precipitation (DP), and by coprecipitation (CP) methods and were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The catalytic activity was tested in the CO oxidation reaction. The structural and surface analyses evidenced the presence of a modified ceria phase in the case of the DP sample and the presence of pure ceria and gold metal crystallites in the case of the SMAD and CP samples. The DP sample, after a mild treatment in air at 393 K, exhibited only ionic gold, and it was very active below 273 K. By…
Total oxidation of naphthalene with high selectivity using a ceria catalyst prepared by a combustion method employing ethylene glycol.
2009
Abstract During the catalytic combustion of naphthalene, compounds other than CO 2 are often obtained. These products, as polymerized polycyclic aromatic hydrocarbons, oxygenated aromatic compounds and benzene derivate compounds, are usually more toxic than naphthalene. At the present work it is shown a nanocrystalline cerium oxide prepared by a combustion method employing a proper ethylene glycol concentration that exhibits very high activity in the decomposition of naphthalene in the presence of air and, most importantly, a selectivity value towards CO 2 of 100% for any range of conversions and/or temperatures used. In addition, it has been demonstrated that the amount of ethylene glycol …